Sliding Doors

The wall-mounted sliding system is designed for single or double-leaf internal doors in the sliding variant. It can be used for doors from our offer in the following finishes: 3D foil, CPL laminates, natural veneers, as well as varnished doors.

We offer two types of sliding systems:
NS – system mounted directly on the wall
NT – system installed with the use of a regulated tunnel

There are two variants of the NT system:
»For a tunnel with an angle of 63 mm
»For a tunnel with an angle of 80 mm
The NS sliding system includes: a guide (LEON SN 150, 180, 200) with fittings, a spacer bar, a masking frame and a fender beam (the beam is only for single-leaf doors, there it is cut in half for the door with a lock in the beam).
Additionally, two 16 mm-thick spacer strips with cross-sections adapted to the width of the angles of 63 mm or 80 mm are added to the NT system. The NS and NT systems also differ in the cross-section of the grille.

A set of sliding doors should be supplemented with a sliding sash. The wings can be equipped with slots with a lock and / or handles – these accessories must be purchased. In the case of the NT system, a regulated tunnel must also be purchased.

The cover and guide for dual systems are obtained by combining two elements from one system.